^Back To Top

The best value at low price and full support

Follow Me

 

Products>Accessorics>TLC>Vertical

TLC General Information

    Principlec

      Thin Layer Chormatography has long been over 100 years on of the most useful of chormatography. In TLC, an aliqout of sample solution is spotted on a porous layer of adsorbent material.

TLC Plate Formats

    Layer Thickness

      TLC plates are 250µm thick for regular analytical TLC and between 500 and 2000µm for preparative TLC. HPTLC have a thinner layer of adsorbent between 150-200µm. All thickness designations are nominal. Actual thicknesses may very but are consistent from batch to batch.

VertiPate™ Soft-Layer

    S-G, Vertipate™ Soft-Layer TLC plate are the kind of most widly used when recovery of the separate compounds is desirable. No organic substances have been added to these products.

VertiPate™ Inorganic Hard-Layer

    High Purity Silica Gel for Increased Sensitivity.

    Narrow Particle Size distribution for faster Separations and Improved   

    Resolution.

    Plate formats are available as Prescored, Prechanneled and Preadsorbent.

    Plate size are available in 20x20cm, 10x20cm and 5x20cm

    Hard-Layer special inorganic binder plus gypsum.

    Adsorbents are available with or without Fluorescent Indication.

VertiPate™ Organic Hard-Layer

    High Purity Silica Gel for Increased Sensitivity.

    Narrow Particle Size distribution for faster Separations and Improved   

    Resolution.

    Plate formats are available as Prescored, Prechanneled and Preadsorbent.

    Plate size are available in 20x20cm, 10x20cm and 5x20cm

    Hard-Layer Organic bider enhanced abrasion resistance and compatible with 

    organic solvents.

    Adsorbents are available with or without Fluorescent Indication.

VertiPate™ Specialty Silica

    High Purity Silica Gel for Increased Sensitivity.

    Narrow Particle Size distribution for faster Separations and Improved   

    Resolution.

    Specialty silica gels are availble as Binder free,Sodium Hydroxide, Silver Nitrate,

    Oxalate.

    Adsorbents are available with or without Fluorescent Indication.

 

VertiPate™ Non-Silica

    Adsorbents are available with alumina B, Alumina N, microcrystalline Cellulose and DEAE celuuulose with or without Fluorescent Indicator.

read pdf

 VertiPate™ HPTLC Unbonded-Silica

    High performance placte provide high resolution and faster Separations in less 

    than 5 min.

    5µm High Purity Silica Gel.

    thinner layer optimized for nanolitre sample.

    Smooth adsorbent surface, ideal for noise free HPTLC scanning.

    Plate formats are available as prescored and Preadsorbent.

 

VertiPlate™ HPTLC Bonded-Silica

    High performance placte provide high resolution and faster Separations in less 

    than 5 min.

    5µm High Purity Silica Gel.

    thinner layer optimized for nanolitre sample.

    Smooth adsorbent surface, ideal for noise free HPTLC scanning.

    Adsorbent available in reversed phase, cyano and amino bonded-silica.

    Prescored dormats are available.

 Vertiplate™ Prep TLC

    Thicker Layers for higher capacity

    Available as 500, 1000, 1500 or 2000µm

    Plate sizes are vailable in 10x20cm and 5x20cm

    Adsorbents are available as silica or non-silica with or without Fluorescent

    Indicator.

 

VertiPlate™ Plastic & Aluminum Backed TLC

    Flexible and Unbreakable.

    cut plates to Sizes Needed.

    Less Expensive than Glass.

    Available with Polyester or Aluminum Backing.

Crpyright©2022 Ligand.

Phone: +66-2950-1818, 081-689-1134, 081-655-6915, 081-344-0429, 081-565-8445, 082-460-8123, 081-584-0730

Email: This email address is being protected from spambots. You need JavaScript enabled to view it. Web: www.ligand.co.th , www.vertichrom.com

Home | Products | Service | About us | Contact us | Webboard